| 1. | | CIMsteel Integration Standards Release 2: Second Edition - P268: CIS/2.1: Volume 4 - The ... | | |
| This publication documents version six of the CIMsteel Logical Product Model (LPM/6), which encapsulates the concepts used in the domain of Structural Engineering in a form that can be implemented in computer systems. It provides illustrated textual descriptions of the entities, with their attributes and formal propositions (rules & constraints), together with references to STEP resources |
| 2. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - 20. References | | |
| Section 20 of P268 Gives the list of publications referenced within P268. |
| 3. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - Index | | |
| Index of P268. Provides a list of all the EXPRESS constructs used in LPM/6 with page references for short form, long form and EXPRESS-G diagrams for each construct. |
| 4. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - Appendix D. Modified Constructs In ... | | |
| Appendix D of P268. Provides a list of the EXPRESS constructs that have been modified in the LPM for the 2nd Edition of CIS/2. |
| 5. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - Appendix C. New Constructs In 2nd ... | | |
| Appendix C of P268. Provides a list of the EXPRESS constructs that have been added to the LPM for the 2nd Edition of CIS/2. |
| 6. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - Appendix B. LPM/6 EXPRESS-G ... | | |
| Appendix B of P268. Provides a graphical presentation (in EXPRESS-G) of the CIS/2.1 implementation schema (i.e. the Long Form of LPM/6). |
| 7. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - Appendix A. LPM/6 EXPRESS Schema ( ... | | |
| Appendix A of P268. Presents the complete LPM/6 that underlies CIS/2 as an EXPRESS schema in its ‘long form'; that is, as one single schema with all the inter-schema references resolved. The Long Form contains no definitions or explanations, merely an EXPRESS long form listing of the CIS/2.1 implementation schema. |
| 8. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - 19. LPM/6 Data Management | | |
| Section 19 of P268. Presents the Data Management subject area, which describes the principles used in CIS/2 that allow engineering data created by one software application to be updated and passed onto another application or fed back to the original application. |
| 9. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - 18. LPM/6 Process Definition | | |
| Section 18 of P268. Presents the Process Definition subject area, which provides constructs to represent the generic processes that are involved in the construction of a steel framed building. The processes produce the products defined in the Product Definition subject area. |
| 10. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - 17. LPM/6 Product Definition | | |
| Section 17 of P268. Presents the Product Definition subject area, which covers the definition of generic products that are the result of (or are produced by) the processes described in the Process Definition subject area. |
| 11. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - 16. LPM/6 Item References | | |
| Section 16 of P268. Presents the Item References subject area, which explains how the concept of ‘international flavours' allows information to be exchanged by being ‘passed-by-reference' rather than being ‘passed by attribute value'. |
| 12. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - 15. LPM/6 Units & Measures | | |
| Section 15 of P268. Presents the Units & Measures subject area, describing the two distinct ways in which units are specified for the measurement of both abstract and real quantities ; i.e. globally or specifically. It also describes how CIS/2 uses uncertainty qualifiers to represent tolerances on measurements. |
| 13. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - 14. LPM/6 Geometry | | |
| Section 14 of P268. Presents the Geometry subject area, which describes how the shape of physical objects may be defined using either explicit geometry, or defined implicitly using sets of parameters such as depth, width, length, etc. It also clarifies the definitions of the EXPRESS constructs for explicit geometry extracted from STEP Part 42. |
| 14. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - 13. LPM/6 Grouping | | |
| Section 13 of P268. Presents the Grouping subject area, which allows certain entities in the LPM to be grouped for a particular purpose. (In line with the six main areas of the LPM, data is grouped as either, analysis data, design data, physical data, project definition data, structural data, or generic data.) |
| 15. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - 12. LPM/6 Location | | |
| Section 12 of P268. Presents the Location subject area, which describes how, physical objects (such as assemblies, parts and joints) are located and oriented with respect to nested coordinate systems. |
| 16. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - 11. LPM/6 Materials | | |
| Section 11 of P268. Presents the Materials subject area, which describes how materials concerned with structural steelwork are represented in CIS/2, and how a material can have a set of material properties that are valid for a particular temperature range. |
| 17. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - 10. LPM/6 Joint Systems | | |
| Section 10 of P268. Presents the Joint Systems subject area, which covers the description and specification of specific joint systems. It also describes how a joint system is the combination of the means by which a structural connection is realized, together with the geometric description of that connection; e.g. a bolted mechanism arranged in accordance with a given layout (or bolt pattern) or a welded mechanism arranged in accordance with a given weld path. |
| 18. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - 9. LPM/6 Features | | |
| Section 9 of P268. Presents the Features subject area, which covers the description and specification of specific features, which are then used within located features, which are used to modify assemblies, parts and joint systems. It also describes how features are categorized by the complexity of their shape definition and by their use, e.g. edge, surface, or volume. |
| 19. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - 8. LPM/6 Parts | | |
| Section 8 of P268. Presents the Parts subject area, which covers the description and specification of generic and specific parts, which are then used within design parts and located parts. It also describes how parts are categorized by their dimensionality and the complexity of their shape definition, e.g. prismatic, sheet or complex. |
| 20. | | M CIS/2.1: Volume 4 - The Logical Product Model (LPM/6) - 7. LPM/6 Structural Response | | |
| Section 7 of P268. Presents the Structural Response subject area, which contains constructs that represent the response of the structure (in the form of an analysis model) to the applied loads. It also describes how the results of the analysis may be given at nodes, element ends, or at a point within the element, and how these analysis results can be described in terms of displacements, forces, velocities or accelerations, and combined as sets. |